This is how I replaced the warn ball joints on my 2000 Pontiac Grand Prix GTP. This should be similar for Buick Regals from 1997-2003, Grand Prix from 1997-2008, and Chevy Monte Carlos from 2000-2007.
I originally intended to grind down the rivets holding the ball joint to the control arm and use a punch to punch them out. That did not work as they would not move at all. I used a 1/8" drill bit to drill a pilot hole and then a 7/16" bit to drill out the rivet. I had to open the control arm hole up to 1/2" as the new bolts wouldn't fit the 7/16" hole.
Just updated your iPhone? You'll find new emoji, enhanced security, podcast transcripts, Apple Cash virtual numbers, and other useful features. There are even new additions hidden within Safari. Find out what's new and changed on your iPhone with the iOS 17.4 update.
Be the First to Comment
Share Your Thoughts